Small Wall sculptures by Grant Flather

$350 By Grant Flather 30cm
$350 By Grant Flather 30cm

Fantail with moon Stainless Sculpture.

Hand made entirely from marine-grade stainless steel.
$220 Wren with moon. 30cm wide

$220 Wren with moon. 30cm wide
$320 Single small banksia wall piece 25cm diameter. Available in Red, Orange or Yellow

$320 Single small banksia wall piece 25cm diameter.

Available in Red, Orange or Yellow

Small-medium wall Sculptures by Grant Flather

Sizes vary from 44cm - 57cm

Flowers are given a six-coat automotive paint treatment.

Leaves are Coreten Steel. Ring is mild Steel. The ring sits on 2cm stainless steel lugs to keep the mild steel off your wall. Easily mounted at the top through a stainless steel washer.

44cm. In orange. $550

44cm. In orange. $550
44cm In Yellow $550

44cm In Yellow $550
57cm With a landing Wren $750

57cm With a landing Wren $750
Driftwood with wrens
Driftwood with wrens

$500 with a nest and one wren.

$750 with a nest and two birds.

Wrens are made from stainless steel.

Easy to hang.
Driftwood with wren and nest
Driftwood with wren and nest

$500 with a nest and one wren.

$750 with a nest and two birds.

Wrens are made from stainless steel.

Easy to hang.
$700 Wren with wattle. 44cm ring
$700 Wren with wattle. 44cm ring
$770. Eucalyptus flowers and leaves. 44cm
$770. Eucalyptus flowers and leaves. 44cm

Leaves are Coreten steel and will develop a rusty patina.
$575. Single banksia with wren and moon wall sculpture
$575. Single banksia with wren and moon wall sculpture

Measures 30x30cm. Available in red, orange or yellow.

Wren and moon are both stainless steel.

$800-$1100 wall pieces by Grant Flather

Sawtooth Banksia Wall sculpture with Eastern Spinebill. By Grant Flather
Sawtooth Banksia Wall sculpture with Eastern Spinebill. By Grant Flather

$1100

Measures 66cm accross. Bird is made from marine-grade stainless steel. Flower is powder-coated. Leaves are Corten steel. Ring is marine-grade stainless steel, as are the lugs holding the ring off the wall. Easily mounted.
Small Grevillea wall sculpture in stainless with Eastern Spinebill. By Grat Flather
Small Grevillea wall sculpture in stainless with Eastern Spinebill. By Grat Flather

$1100.

All made from marine-grade stainless steel.

Flower has an automotive paint treatment including UV resistant 2 pac clear top coats.

Measures 55cm accross.
Small Grevillea with Wattlebird wall sculpture. By Grant Flather.
Small Grevillea with Wattlebird wall sculpture. By Grant Flather.

$1100.

Measures 57cm across.

Flower available in red rainbow or yellow rainbow.

Bird is stainless steel.
$990. Medium Grevillea with Wattlebird wall sculpture VERSION 2.
$990. Medium Grevillea with Wattlebird wall sculpture VERSION 2.

Total height is 60cm.

Flower available in red rainbow or yellow rainbow.

Bird is stainless steel.
View from the Hoddle by Grant Flather. $1100
View from the Hoddle by Grant Flather. $1100

This wall piece depicts a view from the Hoddle Range between Fish Creek and Foster looking toward Wilson’s Promontory. It measures 1m across. Each piece is hand-made and unique.

$1100 - $1500 wall sculptures by Grant Flather

Square Coastal Banksia wall sculpture by Grant Flather
Square Coastal Banksia wall sculpture by Grant Flather

$1250.

Measures 60 × 44cm.

The flowers measure 17cm tall. The leaves are smooth.

Add a bird: $220 wren, $440 other birds.
Double Sqaure Coastal Banksia wall sculpture by Grant Flather
Double Sqaure Coastal Banksia wall sculpture by Grant Flather

$1300

Measures 42 × 60cm.

Mounted on stainless steel lugs.

Add a wren: $220. $440 other birds
Cherry Blossom with Eastern Spinebill
Cherry Blossom with Eastern Spinebill

$1500.

Measures 57cm
Doubke Sawtooth Banksia with landing Wren
Doubke Sawtooth Banksia with landing Wren

$1100

Measures 66cm across.
Single Grevillea wall piece with Landing Bird
Single Grevillea wall piece with Landing Bird

$1300.

Measures 66cm across.

With your choice of bird in stainless steel.
Single Small Grevillea wall sculpture with Eastern Spinebill
Single Small Grevillea wall sculpture with Eastern Spinebill

$1250. By Grant Flather

Measures 60cm diameter. Ring, leaves are in stainless steel but can be in Coreten steel.

Mounted on stainless steel lugs, easily installed at the top.
Single Sawtooth Banksia wall sculpture with Eastern Spinebill
Single Sawtooth Banksia wall sculpture with Eastern Spinebill

$1250. By Grant Flather.

Measures 57cm diameter.

Ring in photo is stainless steel but can be mild steel.

Mounted on stainless steel lugs.
Double Pincushion Banksia wall sculpture by Grant Flather
Double Pincushion Banksia wall sculpture by Grant Flather

$1500

Measures 80cm across.

Flowers are powder-coated and 2pac clear top-coated.

Leaves are Coreten steel (will develop a rusty patina).
Double medium Banksia wall sculpture by Grant Flather
Double medium Banksia wall sculpture by Grant Flather

$1500 ($1600 in stainless steel).

Measures 80cm across.
Sqaure Sawtooth Banksia wall sculpture by Grant Flather
Sqaure Sawtooth Banksia wall sculpture by Grant Flather

$990. ($1250 with bird)

Measures 40 × 70cm
Eucalyptus flowers wall sculpture by Grant Flather
Eucalyptus flowers wall sculpture by Grant Flather

$1200

Measures 57cm across.

Leaves are Corten steel and will devleop a rusty patina

$1500 - $2200 wall sculptures by Grant Flather

By Grant Flather

Flowers are professionally powder-coated (and over-sprayed in the case of the Grevilleas) or made from marine-grade stainless steel.

Leaves are Coreten Steel. Ring is mild Steel. The ring sits on stainless steel lugs to keep the mild steel off your wall. Easily mounted at the top and bottom through stainless steel washers.

Double Grevillea Wall scupture with landing Eastern Spinebill
Double Grevillea Wall scupture with landing Eastern Spinebill

$1900. By Grant Flather

Measures 85cm across.

Bird is in stainless steel.

Flowers can be in pink, Rainbow or orange-yellow.

Leaves are coreten steel
Double Grevillea wall sculpture with Honeyeater on ring by Grant Flather
Double Grevillea wall sculpture with Honeyeater on ring by Grant Flather

$1800 ($1900 with landing bird on leaf with wings out).

Measures 85cm across.

Flowers are powder-coated, over-sprayd and 2-pac clear top coated. Leaves are Coreten steel
Double Medium Banksia with Landing Honeyeater wall sculpture
Double Medium Banksia with Landing Honeyeater wall sculpture

$1900. ($1800 with bird on top with wings in)

Measures 85cm diameter. Flowers are 22cm tall.

Bird can be in stainlees steel or powder-coated and painted.

Flowers can be in red, yellow, orange or gradiated orange-yellow.

Leaves are made from Coreten steel. Frame is 6mm mild steel.

Mounted on stainlees lugs and easy to install top and bottom.
Double Sawtooth Banksia with Eastern Spinebill wall sculpture.
Double Sawtooth Banksia with Eastern Spinebill wall sculpture.

$1800.

Ring measures 66cm - entire piece measures 85cm accross.

Eastern Spinebill is made from marine-grade stainless steel.
$2200 Waratah with honeyeater wall sculpture. 66cm
$2200 Waratah with honeyeater wall sculpture. 66cm

Made from marine-grade stainless steel. Measures 66cm across.
Triple medium Banksia wall sculpture in Orange by Grant Flather
Triple medium Banksia wall sculpture in Orange by Grant Flather

$1900 Available in orange, red, yellow or gradiated

Add a painted New Holland Honeyater on a top of the ring for $300.
$1900. Triple Euc flower wall sculpture with Yellow Robin
$1900. Triple Euc flower wall sculpture with Yellow Robin

Measures 66cm accross. Yellow robin is made from marine-grade stainess steel. Sits on stainless steel lugs and is easily mounted.
prev / next
Back to Wall Sculptures